Clearing Persistent Storage 119
E-EQ-VX7RG-D VX7 Reference Guide
Clearing Persistent Storage
The coldboot utility sets all registry settings back to LXE factory defaults. No other clearing is
available or necessary.
Keyboard Backlighting
This VX7 keyboards illuminate the individual keys
60-Key Keyboard
The keyboard is manually controlled by pressing <2
nd
> + <CTRL> + <F10> when using the 60-
key keyboard. This key sequence immediately changes the state of the keyboard backlight as
follows:
• Turns the backlight Off if it is currently On.
• Turns the backlight On if it is currently Off.
95-Key Keyboard
The keyboard backlight is manually controlled using the “backlight” key in the upper
right hand corner of the keyboard. Pressing the backlight key cycles the keyboard
backlight through the levels of backlight intensity:
• Off
• Maximum intensity
• Medium intensity
• Low intensity.
Changing the Display Resolution
P
The display resolution can only be changed on Platform 2 VX7’s. For more
information on identifying the platform version of your VX7, please see
“Identifying your VX7” in Chapter 2, “Physical Description and Layout”.Error!
Bookmark not defined.Error! Bookmark not defined.
The default resolution of the VX7 display is 800 x 600 pixels. An optional resolution of 640 x
480 pixels is supported.
To change the display resolution to 640 x 480 pixels, run \Windows\dvx7_640x480.reg and
perform a warmboot.
To change the display resolution to 800 x 600 pixels, run \Windows\dvx7_800x600.reg and
perform a warmboot.
Note: These utilities configure the display resolution on warmboot. After a coldboot, the
default resolution of 800 x 600 pixels is enabled.
