A SERVICE OF

logo

Control Panel Options 95
E-EQ-VX7RG-D VX7 Reference Guide
COM Ports
Figure 4-21 Scanner Properties / COM Port Settings
Adjust the settings and click the OK box to save the changes. The changes take effect
immediately.
The COM1 display contains the same parameters as the COM3 Tab. Adjust the settings and click
the OK box to save the changes. The changes take effect immediately.
Note: This panel configures the VX7 for an external scanner. It DOES NOT configure the
tethered scanner. Please refer to the documentation for the tethered scanner for
information on configuring the tethered scanner.
Serial Port Pin 9
To configure either COM port to have power (+5V) on Pin 9, check the “Power on pin 9 (+5V)”
checkbox on the appropriate tab. This is required to supply power to an external scanner,
To configure either Com port to have RI on Pin 9, uncheck the “Power on pin 9 (+5V)” checkbox
on the appropriate tab.