A SERVICE OF

logo

202 Single Application Configuration
VX7 Reference Guide E-EQ-VX7RG-D
Status Panel
Figure 6-9 Administrator Status Panel
Use the Status panel to view the log of previous AppLock operation and to configure which
messages are to be recorded during AppLock operation.
As the status information is stored in the registry and accumulates during AppLock configuration
and operation, it is very important that the administrator periodically clear the status information
to reduce the amount of registry space used. For this reason, the administrator can configure the
type of status information that is logged, as well as clear the status information.
View
Error Error status messages are logged when an error occurs and is intended to be used by
the administrator to determine why the specified application cannot be locked.
Process Processing status shows the flow control of AppLock components and is mainly
intended for LXE Customer Service when helping users troubleshoot problems with
their AppLock program.
Extended Extended status provides more detailed information than that logged by Process
Logging.
All All messages are displayed.
Tap the Refresh button after changing from one view level to another. The filtered records are
displayed, all others are not displayed.
Levels
Note: If a level higher than Error is selected, the status should be cleared frequently by the
administrator.
In addition to the three view levels the administrator can select that all status information be
logged or turn off all status information logging completely. The system default is Error Logging;
however to reduce registry use, the administrator may want to select ‘None’ after verifying the
configuration. Tap the Clear button to clear the status information from the registry.
None
Error
Processing
Extended
All