124 Summit Radio
VX7 Reference Guide E-EQ-VX7RG-D
Summit Radio
S
The Summit radio requires software revision 2BT or greater. All VX7’s with a
Summit radio ship with this software revision or greater. To identify the software
revision, please click on the “About” icon in the CE .NET Control Panel.
Please refer to the “LXE Security Primer” to prepare the Authentication Server and
Access Point for VX7 communication.
It is important that all dates are correct on CE computers when using any type of
certificate. Certificates are date sensitive and if the date is not correct authentication
will fail.
The Summit radio is an 802.11g radio, capable of both 802.11b and 802.11g data rates. This
radio supports no encryption, WEP, LEAP or WPA (PEAP-MSCHAP, WPA/LEAP and WPA-
PSK).
Summit Client Utility
Note: When making changes to profile parameters, the VX7 should be warmbooted afterwards.
Access: Start | Programs | Summit | SCU or SCU Icon on Desktop
Figure 5-1 Summit Client Utility
The Main tab provides information, admin login and active config (profile) selection.
Profile specific parameters are found on the Config tab. The parameters on this tab can be set to
unique values for each profile.
The Status tab contains information on the current connection.
The Diags tab provides utilities to troubleshoot the radio.
Global parameters are found on the Global Settings tab. The values for these parameters apply to
all profiles.
