A SERVICE OF

logo

140 Summit Radio
VX7 Reference Guide E-EQ-VX7RG-D
PEAP/MSCHAP
To use PEAP/MSCHAP, make sure the following profile options are used.
Enter the SSID of the Access Point assigned to this profile
Set EAP Type to PEAP-MSCHAP
Set Encryption to WPA TKIP
Set Auth Type to Open
Figure 5-14 PEAP/MSCHAP
Click Credentials button.
Figure 5-15 PEAP/MSCHAP Credentials
Enter the Domain\Username (if the Doman is required), otherwise enter the Username.
Enter the password.
Leave the CA Certificate File Name blank for now.
Click OK then click Commit. Ensure the correct Active Config is selected on the Main tab.