A SERVICE OF

logo

Open as PDF
next previous
142 Summit Radio
VX7 Reference Guide E-EQ-VX7RG-D
WPA/LEAP
To use WPA/LEAP, make sure the following profile options are used.
• Enter the SSID of the Access Point assigned to this profile
• Set EAP Type to LEAP
• Set Encryption to WPA TKIP
• Set Auth Type to Open
Please see “LEAP” earlier in this section to configure the radio for LEAP without WPA.
Figure 5-17 WPA/LEAP
Click on the Credentials button.
Figure 5-18 WPA/LEAP Credentials
Enter the Domain\Username (if the Doman is required), otherwise enter the Username.
Enter the password.
Click OK then click Commit. Ensure the correct Active Config is selected on the Main tab and
warmboot. The SCU Main tab shows the device is associated after the radio connects to the
network.