Cisco Radio 159
E-EQ-VX7RG-D VX7 Reference Guide
Server Authentication
To validate the server certificate, the root CA certificate must be installed. For instructions for
installing, see “Installing a Root CA Certificate” in this chapter. The RADIUS server certificate is
not required, only the root CA which issued the server certificate.
Navigate to the Wireless Network Properties configuration screen.
Click the Properties button.
Figure 5-42 PEAP Properties, Validate Server Certificate
Check the Validate server certificate box.
Click OK to dismiss the configuration boxes.
When the login box appears enter valid user credentials.
It is possible for to be prompted to accept a Root CA certificate when using PEAP/GTC.
If the trusted root certificate box (as shown in the previous figure) is blank the user will be
prompted to accept the Root CA certificate by name as shown below.
Figure 5-43 Server Connection Warning
If this is the correct server certificate Root CA, click OK. If not, install the correct Root CA as
described in “Installing a Root CA Certificate” in this chapter .
