Filter
Top Products
Inverter/Charger Installation
2–18 975-0239-01-01
Grounding the AC System
See Table 2-4 on page 10 for torque values for the AC terminal and AC Ground bar.
See Figure 2-8 on page 2–11 for torque requirements for the ground bar in the XW Power
Distribution Panel.
Important: Place the Neutral-to-ground bond in a permanently installed AC distribution panel
that is part of the system. This may be a main panel or a sub-panel.
Figure 2-14
Grounding the AC System using the Distribution Panel
Actual ground requirements may vary.
* Depending on the location of the generator and
local code requirements, the generator disconnect
may be located in the power distribution panel.
In an off-grid installation (i.e., where no utility grid is available), the
generator can be connected to the breakers provided in the XW Power
Distribution Panel. No additional breaker is required.