Filter
Top Products
Installation
2–6 975-0320-01-01
Installing the Mounting Bracket
The mounting bracket is designed to be affixed to the vertical structure or surface
to which the GT Inverter will be mounted. The GT Inverter mounting hooks attach
to the flanges on the mounting bracket.
If mounting more than one inverter, install each mounting bracket at least 15 cm
(6 inches) apart to provide enough space for the inverters to hang side by side.
Figure 2-2
Mounting Bracket and GT Inverter
Mounting bracket Back side of the inverter
Mounting slots for
securing the inverter
Mounting flanges
Mounting hooks
Rectangular slots × 25:
0.8 × 3 (5/16 × 1
3/16)
25.3 (10)
57.9 (22 3/4)
All measurements
in cm (inches).
3.8 (1 1/2) from
bottom of bracket
to knockout center
1.3 (1/2) from side of bracket
to knockout center