Filter
Top Products
Configuration
3–18 975-0082-01-01
Auto Gen Start advanced menu
The Auto Gen Start advanced menu contains settings that can give you
even more control over automatic generator starts and stops. To view the
Auto Gen Start advanced menu on the System Control Panel, see page 4–5.
In addition to several items from the basic menu, the Auto Gen Start
advanced menu contains the following sub-menus and commands:
• “Configure Triggers”
• “Configure Gen”
• “View Device Info”
• “Basic Menu”
Configure Triggers
Purpose Selecting “Configure Triggers” takes you to the AGS Triggers menu for
further configuration of Auto Gen Start settings for starting and stopping
the generator.
The Auto Gen Start mode must be set to Manual Off before you change
the trigger parameters.
For more information, see “AGS Triggers menu” on page 3–19.
Configure Gen
Full name Configure Generator
Purpose Selecting “Configure Gen” takes you to the AGS Gen Cfg menu, where
you can adjust settings related to your generator’s operating requirements.
For more information, see “Generator Configuration menu” on page 3–
28.
View Device Info
Purpose Selecting “View Device Info” takes you to the Device Info menu, where
you can view Fault, Warning, and Event logs, and restore Auto Gen Start
default settings.
For more information, see “AGS: Device Info menu” on page 3–35.
Basic Menu
Purpose Selecting “Basic Menu” returns the Auto Gen Start advanced menu to its
basic format.