Filter
Top Products
The Auto Gen Start Menu
975-0082-01-01 3–11
QT Enable
Full name Quiet Time Enable
Purpose “QT Enable” enables or disables the Quiet Time functionality of the Auto
Gen Start.
“QT Enable” applies only when the Auto Gen Start is in Automatic mode.
When to use When you need to use the Auto Gen Start Quiet Time feature, set “QT
Enable” to On, then check or reset the times you have set for “QT Begin”
and “QT End”.
When you have no preferences or restrictions for when the generator
should run, set “QT Enable” to Off.
Outcomes Selecting On enables the Quiet Time feature. If the Auto Gen Start is in
Automatic mode, the Auto Gen Start stops and starts the generator
according to the times you have set for “QT Begin” and “QT End”.
Selecting Off disables the Quiet Time feature. The Auto Gen Start will
ignore the times you have set for “QT Begin” and “QT End”. If the Auto
Gen Start is in Automatic mode, the Auto Gen Start starts and stops the
generator at any time of the day or night in response to battery voltage,
battery state of charge, inverter load, thermostat triggers, and exercise
time.
QT Begin
Full name Quiet Time Begin
Purpose “QT Begin” is a changeable setting that defines the start of quiet time.
This setting also requires you to set “QT End”.
When to use “QT Begin” functions only if the Auto Gen Start is in Automatic mode.
Value Description
On, Off Enable or disable the Quiet Time functionality.
Value Description
12:00AM to 11:59PM
(12-hour clock)
00:00 to 23:59
(24-hour clock)
At the time you set for “QT Begin” the generator will
stop (if it is running) and not be able to start again
until the time you set for “QT End”. It ignores all
automatic start triggers during the time period
between “QT Begin” and “QT End”.