Filter
Top Products
Specifications
Type: 84 inch (2.1 m) width of cut, 5 blades, 3 blade cen-
ter section, and 2 one blade wings. Toro Recycler
technology on Guardian Recycler.
Mowing Rate: Mows up to 4.7 acres/hr (1.9 hectares/
hr) at 5.5 mph (8.8 km/hr).
Trimming Ability: Deck is centered on tractor with 15
inches (38 mm) of over hang on each side. Uncut circle
is 24.0 inches (610 mm) on both left and right with no
brakes.
Height Of Cut: 1–5 inches (25 to 127 mm) adjustable in
1/2 inch (13 mm) increments. Front adjustment is with
snapper pin and grooves in castor shaft. Rear adjust-
ment is with hanger brackets and pin.
Construction: 12 gauge steel, 4.25 inches (108 mm)
deep, welded construction and reinforced with 10 gauge
steel channels. Bolt–in 12 gauge steel chambers.
Cutter Drive: Isolation mount PTO driven gearbox with
1:1.35 spiral bevel gears. One ”BB” section belt on cen-
ter section. One ”B” section belt on each wing. Fixed
idler on main deck with spring adjustment. Self–tension-
ing idler pulleys on each wing. 1.25 inch diameter (32
mm) spindle shafts, turn on two greaseable tapered roll-
er bearings (greaseable from top of deck). A positive
splined connection attaches pulleys to spindle shafts for
high torque capacity.
Blades: Five 19 inch (483 mm) long, .25 inch
(6 mm)
thick, heat–treated steel.
Suspension & Castor Wheels: Two front castors, con-
sisting of 10 inch (254 mm) pneumatic wheel and tire as-
sembly with sealed ball bearings. Rear of deck is
suspended from lift arms with adjustable deck rake. Hy-
draulic counter balance and lift system designed inte-
gral with deck for maximum flotation.
Anti–scalp Features: Anti–scalp cup located on each
blade. Three anti–scalp rollers on center deck. Anti–
scalp wheel and adjustable skid on each wing. Wings
flex 0–15 degrees up.
Deck Covers: High impact plastic covers.
Quick Attach System: Tapered joint with over center
adjustable tensioning latch.
Weight: Guardian Recylcer 660
lbs (299 Kg), Rear Dis-
charge 665 lbs (302 Kg).
Specifications and design subject to change without notice.
84 inch Cutting Units
Page 9 – 2 Rev. A
Groundsmaster 3000/3000–D