Specifications
AWG510 & AWG520 Service Manual
1-13
Table 1-15: Funcion GeneratorĂ(FG)
Characteristics Description
Operation Mode Continuous mode only
Waveform Shape Sine, Triangle, Square, Ramp, Pulse, DC
Frequency 1.000 Hz to 100.0 MHz
Amplitude
Range 0.020 V
pĆp
to 2.000 V
pĆp
,intoa50W load
Resolution 1mV
Offset
Range -1.000 V to +1.000 V, into a 50 W load
Resolution 1mV
DC Level
DC waveform only
Range -1.000 V to +1.000 V, into a 50 W load
Resolution 1mV
Phase AWG520 only
Range -360 degree to +360 degree
Resolution Frequency Resolution
1.000ĂHz to 100.0ĂkHz 0.036Ădegree
100.1ĂkHz to 1.000ĂMHz 0.36Ădegree
1.001ĂMHz to 5.000ĂMHz 1.8Ădegree
5.001ĂMHz to 10.00ĂMHz 3.6Ădegree
10.01ĂMHz to 20.00ĂMHz 7.2Ădegree
20.01ĂMHz to 25.00ĂMHz 9.0Ădegree
25.01ĂMHz to 40.00ĂMHz 14.4Ădegree
40.01MHz to 50.00ĂMHz 18.0Ădegree
50.01MHz to 100.0ĂMHz 36.0 degree
Polarity Normal, Inverted
Duty Pulse waveform only
Range 0.1Ă% to 99.9Ă%
Resolution Frequency Resolution
1.000ĂHz to 1.000MHz 0.1Ă%
1.001MHz to 5.000ĂMHz 0.5Ă%
5.001ĂMHz to 10.00ĂMHz 1.0Ă%
10.01ĂMHz to 20.00ĂMHz 2.0Ă%
20.01ĂMHz to 25.00ĂMHz 2.5Ă%
25.01ĂMHz to 40.00ĂMHz 4.0Ă%
40.01ĂMHz to 50.00ĂMHz 5.0Ă%
50.01ĂMHz to 100.00ĂMHz 10.0Ă%
Marker Out
Pulse Width
Mrker1 Hi : 0Ă% to 20Ă% of 1 waveform period
Lo : 20% to 100 % of 1 waveform period