Specifications
AWG510 & AWG520 Service Manual
1-7
Table 1-6: Main output (Cont.)
Characteristics
3
PV reference pageDescription
Direct DA out
Output voltage 0.5 V
pĆp
(with -0.27 V offset), into a 50 W load
* DC accuracy
Amplitude
0.5 V
pĆp
"10 %
Page 4-36
DC offset
-0.27 V "10 %
* Pulse response (Waveform data: -1 and 1) Page 4-40
Rise time (10 % to 90 %)
x 700 ps
Fall time (10 % to 90 %)
x 700 ps
3
The characteristics are specified at the end of the BNC cable (012Ć0482Ć00).
Table 1-7: Filter
Characteristics Description
Type Bessel low pass filter, 100 MHz, 50 MHz, 20 MHz, and 10 MHz
Rise time (10 % to 90 %) 10 MHz
20 MHz
50 MHz
100 MHz
35 ns
17 ns
7.0 ns
3.5 ns
Delay from trigger 10 MHz
20 MHz
50 MHz
100 MHz
Through
77 ns )1 clock
57 ns )1 clock
47 ns )1 clock
42 ns )1 clock
37 ns )1 clock
See Figure 1-2 for T
d1