Filter
Top Products
COMBAT
®
CABINET HEATERS INSTALLATION, COMMISSIONING, OPERATION AND SERVICE MANUAL
44
SECTION 13: CONVERSION BETWEEN FUELS
13.1 General
All COMBAT
®
Cabinet heaters may be operated on
fuel oil, natural gas or propane gas, depending on
which burner type has been fitted. Any conversion
between fuels must be done by a contractor
qualified in the installation and service of gas or oil-
fired heating equipment. Conversion must be carried
out in accordance with the information provided to
maintain compliance with the CE product
certification.
13.2 Burner Conversion
Burners designed to operate on class D (35 sec)
fuel oil (Gas Oil) may be converted to operate on
kerosine (28 sec). This may shorten the life
expectancy of the fuel pump and fuel train
components.
Burners designed to burn natural gas may be
converted to burn LPG propane gas or vice versa.
For details of the changes necessary, please
contact Roberts-Gordon with the heater serial
number and burner type or consult the burner
manufacturer’s information.
Heaters designed to burn fuel oil may only be
converted to burn gas by replacing the complete
burner.
Heaters designed to burn gas may only be
converted to burn fuel oil by replacing the complete
burner.