Filter
Top Products
3-18
435/485/535
F3-19
OVER
RIDE
ACC
OFF
STOP
RUN
START
Forward Operator Control Console
The following description details the controls located
in the forward operator’s console.
Ignition Switch
The ignition switch (1) has four key positions.
Position A - Accessories “ON,” Engine “OFF”
Position B - Engine and electrical equipment “OFF”
Position C - Warning lights and instruments “ON.”
Engine RUN position.
Position D - Starter motor operates
Engine Shut Down Override Switch
The rocker switch (2) allows the operator to override
the automatic shut down. See “Operating the Engine”
for details on the automatic shut down feature. The
switch should only be used to move the tractor to a
safe area for investigation and repair. Push the top of
the switch to override the shut down system. Push the
bottom of the switch to return to normal (automatic
shut down) operation.
Rotary Beacon Switch (optional)
The rocker switch (3) controls the operation of the
beacon. Push the top of the switch to operate the
beacon. Push the bottom of the switch to turn the
beacon off. Tractors without rotary beacons have a
blanking plate in place of the switch.
Ashtray and Cigarette Lighter
The ashtray (4) can be tilted out for convenient use.
To clean the ashtray, pull it upward and out from the
dash and empty.
The cigarette lighter (page 3-14) is located on the
left of the right hand console. Push the lighter in to
activate. It will automatically pop out when heated.
Return lighter to it’s socket after use.
A
B
C
D
1
F3-16
OVER
RIDE
ACC
OFF
STOP
RUN
START
2
3
4
Section 3 - Operation
Cab Controls & Instruments