Filter
Top Products
435/485/535
3-9
F3-7
Deluxe Seat
The seat is equipped with controls to permit the
following adjustments for personal comfort.
NOTE: All adjustments should be made in the following
order while sitting in the seat.
Adjust the seat using the following procedures:
NOTE: With the engine off, adjust the seat by
turning the ignition switch the “ACC” position.
DO NOT START THE ENGINE.
1. Height/Weight Adjustment
Depress the top of the switch to raise the seat. Release
when the desired height is obtained.
Depress the bottom of the switch to lower the seat.
Release when the desired height is achieved.
2. Backrest Angle Adjustment
Lift the lever and tilt the backrest to the desired
position. Release the lever to lock the backrest in
position.
NOTE: The backrest will tilt backward far enough to
contact the rear window.
3. Fore/Aft Float
Pull up on the lever to allow the seat to float fore and
aft 51 mm (2”). Push down on the lever to lock the
seat into position.
4. Lateral Float
Pull up on the lever to allow the seat to float laterally
51 mm (2”). Push down on the lever to lock the seat
into position.
5. Swivel Adjustment
Pull up on the lever to swivel the seat. Push down on
the lever to lock the seat into position.
6. Fore/Aft Position Adjustment
Pull up on the lever to move the seat forward
or backward to the desired position. Push down
on the lever to lock the seat into position.
1
2
3
4
5
6
Section 3 - Operation
Cab Features - Seating
7
7. Storage tray
Pull out for access.