Agilent Technologies 1690 Weather Radio User Manual


 
6
Contents
To test the threshold accuracy 28
Set up the equipment 28
Connect and configure the logic analyzer 29
Test the ECL Threshold 30
Test the 0 V User Threshold 31
Test the next pod 32
To set up the logic analyzer for the state mode tests 33
To test the single-clock, single-edge, state acquisition 37
Set up the equipment 37
Connect and configure the logic analyzer 37
Verify the test signal 40
Check the setup/hold combination 41
Test the next channels (1680/81A,AD and 1690/91A,AD) 47
To test the multiple-clock state acquisition 48
Set up the equipment 48
Connect and configure the logic analyzer 49
Verify the test signal 51
Check the setup/hold with single clock edges, multiple clocks 52
Test the next channels (1680/81A, AD and 1690/91A, AD) 56
To test the single-clock, multiple-edge, state acquisition 57
Set up the equipment 57
Connect and configure the logic analyzer 58
Verify the test signal 60
Check the setup/hold with single clock, multiple clock edges 61
Test the next channels (1680/81A,AD and 1690/91A,AD) 65
To test the time interval accuracy 66
Set up the equipment 66
Connect and configure the logic analyzer 67
Acquire and verify the test data 69
Performance Test Record 71
4 Calibrating and Adjusting
Logic analyzer calibration 76