Agilent Technologies 1690 Weather Radio User Manual


 
105
Chapter 5: Troubleshooting
General Troubleshooting
The self tests can be run one at a time by clicking on the self-test of interest. The
results of the individual test will be reported under Results. For example, if you
select the Serial Memory Test and the highest reporting level, the following
results should be reported in the status window:
To stop a running test, click Stop.
To reset the self-test options, click Reset.
To view the log file, click Logs..., select the log file you want to view, and click
Open.
If, after completing the self tests, you have failures or you have questions about
the performance of the logic analysis system, contact Agilent Technologies sales
or support at http://www.agilent.com/find/contactus.
9 Click Close to close the Analysis System Self Tests dialog.