Agilent Technologies 1690 Weather Radio User Manual


 
117
Chapter 6: Replacing Assemblies
1680A,AD-series disassembly/assembly
To remove the power supply
1 Do the procedure "To remove the chassis from the sleeve".
2 Disconnect the 16-pin power supply cable and the power sense cable from
the distribution board.
3 Using a Torx T-15 screwdriver, remove four screws that secure the power
supply to the chassis.
4 Lift the power supply out of the chassis.
5 Disconnect the 14-pin and the 10-pin power supply cables from the
distribution board.