Filter
Top Products
35
Chapter 3: Testing Performance
To set up the logic analyzer for the state mode tests
select the M1 marker.
c In the Position box, select Value.
d Click on the Occurs... button and the Value dialog appears.
e Click on the Find occurrences field, and enter 4096.
f Click on the pattern field, then enter the following pattern according to
the logic analyzer being tested:
1680A,AD, 1690A,AD - "AA"
1681A,AD, 1691A,AD - "2A"
1682A,AD, 1692A,AD - "AA"
1683A,AD, 1693A,AD - "A"
g Click OK to close the Value dialog.