Filter
Top Products
129
Chapter 6: Replacing Assemblies
1680A,AD-series disassembly/assembly
Reverse this procedure to assemble the front panel assembly.
If the front panel requires replacement, a product ID label must also be ordered
and applied (refer to chapter 7 for the part number).
To remove the distribution board
1 1 Do the following procedures:
To remove the chassis from the sleeve
To remove the front panel assembly
2 Disconnect all cables from the distribution board as shown.
3 Using a Torx T-10 screwdriver, remove six screws that secure the
distribution board to the chassis.
4 Lift the distribution board away from the chassis.