Filter
Top Products
120
Chapter 6: Replacing Assemblies
1680A,AD-series disassembly/assembly
4 Using a Torx T-6 screwdriver, remove three screws that secure the CD-
ROM drive to the bottom bracket. Lift the CD-ROM drive out of the bottom
bracket.
5 Reverse this procedure to reassemble and install the CD-ROM drive.
Ensure the motherboard is properly installed before installing the CD-
ROM drive.
To remove the flexible disk drive
1 Do the procedure "To remove the chassis from the sleeve".
2 Unplug the flexible disk drive cable from the rear of the flexible disk drive.