Filter
Top Products
Operating Instructions
153 146 75
C 9.92
Special operating instructions
Stationary operation
The tractor can be used for stationary operation, for exam-
ple, to drive a water pump via the PTO shaft.
ATTENTION
Park the tractor on level ground in both direc-
tions.
- Attach the stationary equipment to the PTO shaft (1) at
the front or rear.
- Set the program switch to 0.
- Apply the parking brake.
DANGER
Before switching on the PTO, make sure no-
one is standing in the vicinity of the tractor
and the rotating PTO shaft.
Hydraulic oil for stationary operation
During stationary operation hydraulic oil can be tapped, for
example, for the operation of a hydraulic dump body.
Max. oil quantity ...................................................... 22 L
ATTENTION
Before starting to drive after stationary opera-
tion, first check that the hydrostatic steering
is operational. Turn the steering wheel fully to
the right and left several times to release air
from the steering system.
Bild_C992H_030
1