Filter
Top Products
Operating Instructions
153 146 111
C 9.92
Operating the attachments
Operating priority flow valve I*
Priority flow valve I is used to drive the servo motor in an
attachment with a variable hydraulic power demand, for
example, salt spreader, hedge cutter, etc. The working speed
can be set independently of the tractor engine speed. The
priority flow valve is fed by the (standard) working pump
and operated from the driver’s station.
- Connect the hydraulic hoses of the attachment to the
red quick couplings for the drive (1) and return line (2)
at the front of the vehicle.
- Turn on the master switch (5) for the working hydrau-
lics.
ATTENTION
Press button (4) only at low engine speed.
- Press key (4). The red LED will come on.
ATTENTION
Increase the speed of the engine slowly.
* Option
Bild_C992H_035
54
3
Bild_C992H_036
2
1