Filter
Top Products
C 9.92
Operating Instructions
56 153 146
Taking into service
NOTE
The battery charging indicator (6), the engine
oil pressure indicator (7), parking brake indi-
cator (8) (if parking brake is engaged) come
on.
- Turn the ignition key to position 2.
The engine will be preheated. The preheating indicator
(5) will come on.
NOTE
When starting at low temperatures, hold the
ignition key longer (approx. 1 minute) in posi-
tion 2.
- When the preheating indicator extinguishes, turn the
ignition key to position 3 to start the engine.
ATTENTION
Operate the starter only for a maximum of
20 seconds. Wait one minute, then repeat the
starting procedure. Repeat the starting pro-
cedure only twice at most. In case the en-
gine does not start, carry out a troubleshoot-
ing according to the section entitled „Malfunc-
tions, causes, remedy“.
- Release the ignition key after the engine has started.
The battery charging indicator (7) and the engine oil
pressure indicator (6) should extinguish.
- Set the engine speed with the hand throttle or acceler-
ator pedal to the desired RPM (9).
- The hour meter (10) is activated.
Km/h
0000000h
25
15
20
5
10
30
RPMx100
electronic
0
Motor
digital system
1
2
5 96
7
8 10
Bild_C992H_074