Filter
Top Products
Operating Instructions
153 146 181
C 9.92
Maintenance after the first 500 service hours
Cleaning the suction filters of the traction
and working hydraulics, replacing if neces-
sary
- Remove the pin (3) of the hydraulic cylinder (4).
- Remove the banjo bolts (2).
- Remove the filter cover fastening screws (1).
- Pull out the filter housings with the star filter.
ATTENTION
Observe the instructions for handling fuel, flu-
ids and lubricants!
Cleaning:
- Wash the star filters with clean diesel oil and blow out
with compressed air.
Replacement:
- Unscrew the star filters from the filter housing with a
46mm open-ended wrench.
- Screw new filters on the filter housing, using new
rubber toric rings.
Installation is in the reverse order of removal.
Bild_C992H_082
4
3
2
1
1
2