Holder C 9.92 H Lawn Mower User Manual


 
C 9.92
Operating Instructions
Maintenance after the first 50 service hours
172
Replacing the traction hydraulics pressure
filter
- Remove the air filter housing (1) with a 24mm wrench.
ATTENTION
Observe the instructions for handling fuel, flu-
ids and lubricants!
- Clean the mating surface of the filter mount.
- Withdraw the pressure filter from the housing.
- Clean the housing.
- Coat the new gasket with oil.
- Insert the new pressure filter in the air filter housing.
- Using a new gasket, screw the air filter housing in the
filter mount.
- Check for leaks.
- Check the hydraulic oil level.
Bild_S 990_047
1