Filter
Top Products
C 9.92
Operating Instructions
60 153 146
Operation
Driving
Driving with hydrostatic drive
- Start the engine.
- Preselect the direction of travel with the direction
switch (1).
- Pull up the direction switch (1) and move it forward or
backwards (forward or reverse).
NOTE
After the start of the engine, the direction
switch must be operated once if it was in the
forward or reverse position when starting. This
feature is to prevent accidental movement of
the vehicle when starting the engine.
NOTE
You can also reverse the direction of travel
while driving at reduced speed.
CAUTION
The tractor will brake strongly and speed up
again in the opposite direction.
- Set the speed range knob (2) (at the steering column)
to the desired ground speed range:
ATTENTION
The tractor must be stationary for switching.
1
Bild_C165
Bild_C992H_075
2