Filter
Top Products
C 9.92
Operating Instructions
214 153 146
Maintenance every 2 years
Replacing the air conditioner V-belt
- Remove the rear frame, radiator and annular fan.
- Loosen the screws (3).
- Loosen the locknut (2) and tensioning screw (1).
- Remove the V-belt (4) and install a new V-belt.
- Screw in the tensioning screw (1) until the correct belt
tension is reached.
- Retighten the locknut (2) and screws (3).
- Refit the annular fan.
ATTENTION
Secure the annular fan screws with Loctite
243.
- Refit the rear frame and radiator.
Bild_S 990_044
1 2
3
Bild_S 990_045
3