Filter
Top Products
Operating Instructions
153 146 105
C 9.92
Operating the attachments
Operating the attachment variable pump* (adjustable
to 0-120 L)
The attachment variable pump is a device for operating at-
tachments with a high hydraulic power requirement, eg a
cylinder mower. The pump is operated electrically from the
driver’s station.
- Connect the hydraulic hoses of the front or rear
attachment to the return line (1) and supply line (2)
quick couplings and, if necessary, to the black
leakage oil coupling (4).
- Plug the coded plug of the attachment into the socket
(3) beside the quick couplings.
NOTE
Only one coded plug may be plugged in at
the front or rear.
NOTE
If a new or unknown attachment is to be in-
stalled, the cable harness for attachment
encoding 204-80-72 must be used. The cor-
rect encoding must be determined after con-
sultation with the manufacturer of the attach-
ment and Holder.
* Option
Bild_C992H_033
1 2
4
3