Filter
Top Products
Operating Instructions
153 146 143
C 9.92
Malfunctions, causes, remedy
The following tables list malfunctions and their possible
causes. If you can not carry out the remedial measure your-
self, please contact a service centre or our customer serv-
ice.
The optional test and control box BB3 or the Bodem PC
software is available for further troubleshooting/diagnosis/
traction electronics calibration.
Engine and exhaust gas turbocharger mal-
functions
Please observe the notes in the operating instructions for
the engine.
Traction electronics and traction hydraulics
malfunctions
Malfunction Cause Remedy
Traction electronics in general Traction electronics defective
The warning light is illuminated or
flashes if the following conditions are
fulfilled:
• Ignition on
• Driving program switch at 1, 2, 3 or
4
•
Direction switch in neutral position
Read out fault history with BB3 or
Bodem
Eliminate the fault
Clear the fault in the error memory