Filter
Top Products
Operating Instructions
153 146 189
C 9.92
Maintenance as required
Cleaning the condenser
- Turn on the ignition (engine off).
- Operate the fan reversal switch (1).
- The fans will rotate in the reverse direction and run as
long as the switch is pushed.
NOTE
With this function it is easy to remove any collec-
ted grass from the air conditioner.
Checking the condenser for the free flow of
air, cleaning if necessary
- Inspect the ribs for accumulation of dirt.
- If little dirt has accumulated, blow out the ribs with
compressed air opposite to the normal direction of air
flow.
- In case of a heavy accumulation of dirt or a greasy
coating, first clean with a soap solution or an appro-
priate cleaning solution (not aggressive for copper or
aluminium) and followed by cleaning with compressed
air or a jet of water.
1
Bild_C992H_064
2
3