Filter
Top Products
Command Reference 9-89
:ACQuisition :HOFF :TIMEPM6680B PM6681
8 «<Decimal value> |MIN|MAX»
Hold Off Time
Sets the Hold Off time value.
Parameters:
<Decimal data> = a number between 200E–9 and 1.6777215 for PM6680B,
and between 40E–9 and 1.34217727 for PM6681.
Returned format:
<Decimal value>¿
*RST condition:
10 ms for PM6680B and 1 ms for PM6681
:ACQuisition :HOFF :MODEPM6680B PM6681
8 «TIME|EVENt»
Hold Off Mode
Selects if triggering is going to be disabled for a preset time or for a preset number
of events.
When set to event, the counter counts negative edges on the B input (channel 2).
This function is coupled to the :ARM:START:DEL, :ARM:START:ECO,
:ARM:STOP:DEL and :ARM:STOP:ECO. The different delays must all be of the
same type, (Time or Event). This means that setting one of them to Event delay
causes the others to be set to Event delays.
Parameters:
TIME
EVENt
Returned format:
TIME| EVENt¿
*RST condition:
TIME