Filter
Top Products
Command Reference 9-11
:ARM :STOP :SLOPePM6680B/81/85
8 «POSitive | NEGative»
External Stop Arming Slope
Sets the slope for the stop arming condition.
Returned format: POS|NEG¿
Example:
SEND® :ARM:STOP:SLOP 8 NEG¿
*RST condition: POS
Complies to standards: SCPI 1991.0, confirmed.
:ARM :STOP :SOURcePM6680B/81/85
8 «EXTernal2 | EXTernal4 | IMMediate»
External Stop Arming Source
Selects between channel 2 (Input B) and channel 4 (Input E) as stop arming input,
or switches off the stop arming function.
Parameters:
EXTernal2 is input B (Only PM6680B/81)
EXTernal4 is input E
IMMediate is Stop arming OFF
Returned format: EXT4|IMM¿
Example:
SEND® :ARM:STOP:SOUR 8 EXT4¿
*RST condition: IMM
Complies to standards: SCPI 1991.0, confirmed.