76 Avalanche
MX3 Reference Guide E-EQ-MX3RG-J-ARC
Avalanche
Note: Wavelink Avalanche is not designed to run on a device with a 900MHz or Narrowband
radio.
Avalanche may or may not be installed on your mobile device. Refer to this section for important
information relating to Avalanche running on an MX3. Contact your LXE representative if
Avalanche is needed and your mobile system has not been upgraded to the required minimum
software baseline revision levels. For complete instruction when using Avalanche please refer to
the “LXE Computers and Wavelink Avalanche User’s Guide” on the LXE Manuals CD.
Minimum Software Baseline
The minimum software revision level (baseline) must be loaded on the mobile device in order to
use Avalanche:
Operating System............................486DGSYS.02A
LXE Agent......................................AGNTGD00.01C
Util ..................................................MX3GUTIL.01B
Core.................................................486DGCOR.01A
Avalanche Number .........................AVA1GD01.01A
Cisco 350 Radio Driver ..................C802GD35.01H
Lucent Radio Driver .......................L802GD01.01P
Symbol 4121 Radio Driver.............S802GD21.01E
Upgrading the MX3
If an LXE computer does not meet the minimum baselines specified above, it must be manually
upgraded to the baseline before it can be used with Avalanche. The older G-Number software
should be manually deleted from the LXE computer before the new G-Number is installed.
!
Copying the new G-Number software to the LXE computer without first deleting the
old G-Number software may lead to insufficient disk space on the LXE computer.
This is especially important for LXE Agent, Radio and Core G-Numbers.
