72 Configuration and Sample Files
MX3 Reference Guide E-EQ-MX3RG-J-ARC
; Auth_Type Open_System
; Auth_Type Shared_Key
; Encrypt_Key1 "xx xx xx xx xx"
; Encrypt_Key2 "xx xx xx xx xx"
; Encrypt_Key3 "xx xx xx xx xx"
; Encrypt_Key4 "xx xx xx xx xx"
; Encrypt_Key_ID n
link driver slainit
verbose yes
DynWindowRsrcs yes
Symbol 4121 11Mb Radio
NET.CFG File
See Chapter 6, “RF Network Configuration”, for explanations of NET.CFG
parameters.
; 1. A semicolon as the first non blank character denotes a
; comment line.
; 2. Commented out parameter lines create the default setting.
; 3. Rate control only works with 2 Mbps (or greater) radios
; 4. Encryption controls only work with 2Mbps (or greater)
; radios
; 5. ESSID must be changed to reflect the local network.
link support
Buffers 4 1550
Protocol ODIPKT
Bind s11odi
link driver s11odi
frame ethernet_II
; frame ethernet_802.2
; The ESS_ID can be a string of 1 to 32 case sensitive characters.
ess_id 101
station_name
; Use the following keyword to specify rates at which the Adapter
; is allowed to operate. If no rates are specified, the Adapter
; will use all rates available on the radio. Regardless of what is
; specified, the radio will allow either 1 and 2 Mbps or all four
; rates, i.e., 1, 2, 5.5, and 11 Mbps.
; Tx_Rate 1 (1 Mbps)
; Tx_Rate 2 (2 Mbps)
; Tx_Rate 5 (5.5 Mbps)
; Tx_Rate 11 (11 Mbps)
;
; Tx_Rate 1
; Tx_Rate 2
; Tx_Rate 5
; Tx_Rate 11
; Note: IO Mode is required if using Card/Socket Services
Mode IO
IOAddress 340
Memory CC000
