NET.CFG Parameters 139
E-EQ-MX3RG-J-ARC MX3 Reference Guide
Encrypt_Key_ID
The key ID indicates which key the adapter is to use for encrypting packets.
Valid: 1 to 4
Default: 1
Note: This parameter is valid for Symbol FHSS radios only.
Encrypt_Enable_Index
Previously named encrypt_key_index. This parameter indicates which key the adapter is to use for
encrypting packets for transmission. Zero means No Encryption (i.e. turn encryption off), and
numbers 1 through 4 mean turn encryption on and use the specified key (i.e. key #1, key #2, key
#3 or key #4). The key to be used to decrypt packets being received is contained in the received
packet.
Valid: 0,1,2,3,4
Default: 0 (No Encryption)
Note: This parameter is valid for Symbol 4121 series radios only.
diversity
Set diversity to “both” for two antennas and “A” for one antenna.
Default: both
Note: This parameter is valid for Symbol 4121 series radios only.
Tx_rate
Use this parameter to specify that rates at which the radio is allowed to operate. If no rates are
specified, the radio will use all available rates.
Valid: 1 1 Mbps
2 2 Mbps
5 5.5 Mbps (Symbol 4121 series only)
11 11 Mbps (Symbol 4121 series only)
