90 BIOS Setup
MX3 Reference Guide E-EQ-MX3RG-J-ARC
Docked PM
Use the Docked PM parameter to set the power management preferences for the MX3 when it is
in a powered cradle.
Selecting Lights Off will turn off the display and keypad backlights.
Selecting Unchanged maintains the current power management settings.
Selecting Off disables power management settings when the MX3 is in a powered cradle.
Values: Off
Unchanged
Lights Off
Default: Off
Touch Wake
This parameter is used to determine whether the MX3 recovers from Suspend mode when the
screen is touched. The MX3 must have a touch screen installed and active.
See also Suspend.
Values: On, Off
Default: On
Power Key
Use this option to determine how the Power key will function when pressed.
When Disabled is selected and the user presses the Power key, nothing happens. The user will not
be able to place the unit in Suspend with the Power key or turn the unit off.
Note: When the Power key is disabled, the MX3 will power off only when both the Main and
Backup batteries are depleted.
When Suspend is selected, the MX3 will enter Suspend state upon a Power key press.
When No Susp is selected and the user presses the Power key, nothing will happen unless the user
holds the key down for 4 beeps. In other words, the user cannot suspend the MX3. The user can
only turn the MX3 off.
When Suspend-Off is selected, the user can both suspend and power off the MX3. If the user holds
the Power key down for less than 4 beeps, the MX3 will transition to the Suspend state. If the user
holds the Power key down for 4 beeps, the MX3 will power off.
Values: Disabled
Suspend
No Susp
Suspend-Off
Default: Susp-Off
Note: Before leaving this screen, make sure the Power Key status is correct.
