30 Physical Controls
MX3 Reference Guide E-EQ-MX3RG-J-ARC
Power Status and the Status LED
Figure 2-3 Power Status and the Status LED
The Status LED is located above the 7 key on the keypad. The LED changes color and state
depending on power status.
Status LED Condition
Off MX3 is Off.
OR
The MX3 is powered On and the display is On.
Steady Green The MX3 is powered On and the display is Off. Press any key to turn the
display On.
Blinking Green The MX3 is in the Suspend state. Tap the Power key to exit the Suspend
state. To turn the MX3 off, hold the Power key down for 4 beeps to turn the
MX3 off. There may be a brief wait while the MX3 synchronizes with the
RF network.
Steady Red Main Battery Low Warning or Low Main Battery. Replace the main battery
or place the unit in a powered storage cradle or connect the MX3 to
external power using the jack input.
Blinking Red Main Battery Power Failure or the Main Battery is depleted, the MX3 is in
Critical Suspend mode. The MX3 is drawing power from the backup
battery. Replace the main battery or place the unit in a powered storage
cradle or connect the MX3 to external power using the jack input. The
MX3 will turn off in 5 minutes (default or the value selected in BIOS Setup
for the Off Timer limit) if no action is taken.
