A SERVICE OF

logo

160 Startup Problems
MX3 Reference Guide E-EQ-MX3RG-J-ARC
Setting System Time and Date
1. If the MX3 is not already powered up, turn it on.
2. During bootup the <F2> key must be pressed to enter BIOS Setup.
3. At the BIOS Setup Main Menu, move the highlight to the Time parameter.
4. Type the desired entry and then press the <Tab> key to move from hours to
minutes to seconds. The colons are automatically added by the system.
5. Press the <DownArrow> to move to the Date parameter.
6. Type the desired entry and then press the <Tab> key to move from month to
day to year. The backslashes are automatically added by the system.
7. Press <Right Arrow> until you reach the Exit menu.
8. Select “Save and Exit” to save the changes. Press <Enter>.
If the MX3 does not automatically reboot, turn the MX3 off and then on again.