58 Installed Software
MX3 Reference Guide E-EQ-MX3RG-J-ARC
\UTILS
Note: The utilities included in the following list are included with all non-terminal emulation
configurations.
Filename Function
BBDIS81.EXE Battery Discharge Utility. Condition the 50 mAh NiCd Backup Battery
mounted on the system board. The battery discharge starts and when
discharged switches to backup battery charge mode.
BBTST81.EXE Backup Battery Test Utility. Indicates the current status of the backup
battery and the voltage.
BCWEDGE.EXE Barcode Wedge utility. Interprets data from barcode scanner as
keyboard data. Does not function in Win95.
BEEP81.EXE Beeper Utility. Changes the volume of the beeper using the up and
down arrow keys on the keypad/keyboard.
COMTST81.EXE Communication Port Utility. To diagnose the serial communication
port, a simple loop back test routine is included in this file. The figure
showing how to build a loop back plug is included in this chapter. The
test results will read PASS or FAIL. A failure is identified and
described.
DISP81.EXE Display Utility. Activates every pixel on the display to verify
functionality.
KEY2381.EXE Keyboard Utility. This utility performs a contact functional test of each
key on the keyboard. When activated, the key labels appear on the
screen and then each key, when initialized, clears the key label from
the screen.
LXEF.EXE File Transfer Utility. Transfer files using serial port or IR ports. Also
acts as agent for the Win32 Developer Toolkit Application.
PARAM81.EXE Parameter Dump Utility. This utility collects the setup configurable
parameters and lists them in a text file.
SCU.EXE Scanner Configuration Utility. Allows programming multiple scanners
with the same data.
SETAPI_4.EXE Set An API Function. Runs an API call to set a mode or change a
parameter.
TSCAL.EXE Touchscreen (Digitizer) Calibration Utility. Calibrates the touchscreen
to the display screen area.
TSTEST.EXE Touchscreen (Digitizer) Test Utility. Verifies touchscreen calibration
when the data mode is set in compensated mode.
The following utilities are included with terminal emulation configurations.
BBDIS81.EXE BBTST81.EXE BCWEDGE.EXE
COMSTS81.EXE PARAM81.EXE SCU.EXE
SETAPI_4.EXE
