NET.CFG Parameters 137
E-EQ-MX3RG-J-ARC MX3 Reference Guide
Symbol Parameters
The following is a list of parameters that can be modified in the NET.CFG file. To set the TCP/IP
parameters see the SOCKET.CFG file documentation. Unless otherwise noted, the following
parameters apply to both Symbol FHSS (2Mb) and Symbol 4121 (11Mb) series radios,
Link Support
Parameter used to define resources for the LSL.COM file. Any modifications may cause resource
conflicts.
Protocol
Instructs TCP/IP stack to bind to radio driver.
ESS_ID
Identifies the 802.11B wireless network the station will connect to. The ESS_ID is a string of 1 to
31 case sensitive characters. Spaces may be included by using quotes.
Default: “LXE”
cardservices
To use card and socket services, you must load slainit before slaodi. iodaddress, memory,
interrupt and socket lines must be commented with ;.
Default: yes
Note: This parameter is valid for Symbol FHSS radios only.
socketservices
To use card and socket services, you must load slainit before slaodi. iodaddress, memory,
interrupt and socket lines must be commented with ;.
Default: yes
Note: This parameter is valid for Symbol FHSS radios only.
mode
IO mode required if using card and socket services.
Default: IO
ioaddress
Sets the I/O address location.
Default: 300
memory
Sets the resource memory location.
Default: CC00
