22 Manuals and Accessories
MX3 Reference Guide E-EQ-MX3RG-J-ARC
Scanner, LS3203, Ext Rng, 20’ Cbl, US 8011LS3203ERC20DUS
Scanner, 5312IP, 7’ Cbl, WW 8101IP5312XXC07DWW
Scanner, 530052IP, 7’ Cbl, WW 8104IP530052C07DWW
Scanner, 530072IP, 7’ Cbl, WW 8105IP530072C07DWW
Scanner, 530092IP, 7’ Cbl, WW 8110IP530092C07DWW
Scanner, 5312IP, 15’ Cbl, US 8101IP5312XXC15DUS
Scanner, 530052IP, 15’ Cbl, US 8104IP530052C15DUS
Scanner, 530072IP, 15’ Cbl, US 8105IP530072C15DUS
Scanner, 530092IP, 15’ Cbl, US 8110IP530092C15DUS
Scanner, LS3408ER, 9’ Cbl, US See Note 8520A326SCNRERDA9F
Scanner, LS3408FZ, Fuzzy Logic, 9’ Cbl, US See Note 8510A326SCNRFZYDA9F
PCMCIA Cards
SRAM Card, 2 MB 9000A102PCC2SRAM
SRAM Card, 4 MB 9000A103PCC4SRAM
SRAM Card, 2 MB, Low Temp 9000A104PCC2SRAMLO
SRAM Card, 4 MB, Low Temp 9000A105PCC4SRAMLO
Holding Accessories
Strap, Hand, Nylon 2381A407HANDSTRAP
Nylon Holster for use with Belt 2381A401HOLSTER
Nylon Hip Flip 2381A403HIPFLIP
Nylon Case with Shoulder Strap 2381A402CASE1
Miscellaneous
Pen, Stylus, Black, 2335 2335A501PASSIVEPEN
Battery Chargers and Battery
6 Unit Charger 2381A377CHGR6
5 Unit Charger/Analyzer, US 9000A377CHGR5US
5 Unit Charger/Analyzer, WW 9000A377CHGR5WW
Battery, Li-Ion, 1400 mAh 2381A376BATT1600
Battery, Li-Ion, 1800 mAh MX3A378BATT
Cradles and Cradle Power Supplies
Desktop Cradle
1
2381A001DESKCRADLE
Vehicle Mount Cradle
1
2381A003VMCRADLE
AC Power Supply, US 9000A301PSACUS
AC Power Supply, International, No power cord 9000A302PSACWW
Power Cord, AC, US 9000A066CBLPWRAC
Power Adapter, Bare Wire 12 VDC 1300A053CBL12ML3
Power Adapter, 24-72 VDC, 20 Watts 1300A301PS24WW
Power Adapter, 110-240 VAC 1300A303PSACWW
Cables for Cradle and MX3 Serial Ports
Cable, Printer/PC, DA-9F to DB-25M, 6 ft. 9000A053CBL6D9D25
Cable, PC, DA-9F to DA-9F, 6 ft. 9000A054CBL6D9D9
Note: When using the 8500 Series tethered scanners, the tethered scanner Power Mode must be
set to “Reduced Power Mode”to conserve MX1 battery life. The reduced power mode setting will
not impact performance of the 8500 series scanner. The default mode is “Continuous On”. Please
refer to the manufacturer’s user guide for instruction
1
Power Adapter Required.
