56 Installed Software
MX3 Reference Guide E-EQ-MX3RG-J-ARC
\DOS Files
Filename Description
ANSI.SYS Interprets ANSI escape sequences.
CHKDSK.EXE Checks the status of a disk and displays a report. Can also fix disk
errors.
COMMAND.COM A DOS file that runs programs, manages files, controls information
processing, directs input and output, among other functions.
FORMAT.COM Formats a read-write disk drive (flash and RAM drives only) removing
all data.
HIMEM.SYS Extended memory manager.
MEM.EXE Displays the amount of used and free memory on a computer.
MODE.COM Configures system devices.
MORE.COM Displays 25 lines of output at a time.
NED.CFG Configuration file for NED.EXE ASCII text editor.
NED.EXE This program is used when editing ASCII text files.
REMDISK.EXE Companion file to REMSERV.EXE. Each computer must use the same
baud rate and packet or non-packet-style transmission. This file runs
on one computer and REMSERV.EXE runs on the other.
REMSERV.EXE Companion file to REMDISK.EXE. This file runs on one computer
and REMDISK.EXE runs on the other. Used for manipulating files on
two computers’ hard disks. Use a null modem cable connecting both
serial ports.
REV.BAT Displays software revision level.
SYS.COM Adds system files to disks.
VER Displays the current version identity of DOS. This command is run at
the DOS prompt.
XCOPY.EXE Copies multiple files and, optionally, subdirectories from one disk to
another.
\AGENT
The SNMP agent files are loaded on MX3’s with a 2.4GHz radio.
Please refer to the “SNMP Agent Reference Guide” and “Client Configuration
Manager” for more details on the SNMP agent. Please refer to the following section
titled “Avalanche” when Avalanche is installed on the MX3.
Filename Description
AGENT.EXE Diagnostic agent. Provides limited access to the LXE Private MIB.
CFGAGENT.EXE Configuration agent. Provides full access to the LXE Private MIB.
REV.BAT Displays current software revision level.
