A SERVICE OF

logo

8 Getting Started
MX3 Reference Guide E-EQ-MX3RG-J-ARC
Attach Handstrap (Optional)
An elastic handstrap is available for the MX3. Once installed, the handstrap provides a means for
the user to secure the computer to their hand. It is adjustable to fit practically any size hand and
does not interfere with battery charging when the MX3 is in a docking station.
Figure 1-6 MX3 With Handstrap Installed
Tool Required: #1 Phillips Screwdriver
Installation
1. Remove the MX3 from the docking station.
2. Put the unit in Suspend mode or turn the unit off to prevent accidental key presses when you
are attaching the handstrap.
3. Place the MX3, with the screen facing down, on a flat stable surface.
4. Attach the handstrap to the MX3 with the screws and washers provided.
5. Test the strap’s connection making sure the MX3 is securely connected to each end of the
strap connectors.