Filter
Top Products
Workman MDX--DPage 4 -- 28Drive Train
1. Input shaft 2. Ball bearing
Figure 32
1
2
B. Replace input shaft if worn or damaged. Gear
teeth that are cracked, broken, chipped or missing
are not acceptable.
C. Ball bearing roller balls must be free of deforma-
tion and scoring. Ball bearing must spin freely and
have minimum axial play. Replace ball bearing as
necessary.
5. Disassemble c enter shaft assembly.
1. Ball bearing 2. Ball bearing
Figure 33
1
2
IMPORTANT: Do not reuse ball bearings that have
been removed.
A. Remove ball bearings from the center shaft as-
sembly. Discard removed bearings.