Toro MDX-D Utility Vehicle User Manual


 
Workman MDX--DPage 3 -- 12Diesel Engine
Radiator
Figure 9
1. Surge tank
2. Tank cap
3. Radiator
4. Washer head screw (2 used)
5. Flange nut (3 used)
6. Cap
7. Cap decal
8. Filler neck
9. Lower radiator hose
10. Upper radiator hose
11. Straight hose
12. Hose clamp (6 used)
13. Carriage screw (3 used)
14. Flange nut (3 used)
15. Cap
16. Hose clamp
17. Lower radiator shroud
18. Upper radiator shroud
19. Speed nut (4 used)
20. Washer head screw (4 used)
21. Coolant hose
22. Coolant hose
23. Hose clamp (4 used)
FRONT
RIGHT
19
22
21
5
8
9
10
11
12
13
14
5
18
19
20
6
7
13
20
12
12
12
23
12
23
17
14
1
2
15
16
4
23
3
CAUTION
DO NOT open radiator cap or drain coolant if the
engine orradiator ishot. Pressurized hotcoolant
can escape and cause burns.
Ethylene-- glycol antifreeze is poisonous. Dis-
pose ofit properly or store itin a properly labeled
container away from children and pets.
Radiator Removal (Fig. 9)
1. Park machine on alevel surface, stop the engine, en-
gage parking brake andremove the keyfrom the ignition
switch.
2. Raise and support cargo bed to access radiator.
3. Remove knob that secures radiator screen to right
side of rear frame (Fig. 10). Lift screen to separate tabs
on screen from slots in frame and then remove screen
from vehicle.