Filter
Top Products
Command Descriptions
TDS 310, TDS 320 & TDS 350 Programmer Manual
2Ć43
CALibrate (No Query Form)
The CALibrate command instructs the oscilloscope to perform an internal
selfĆcalibration.
The selfĆcalibration can take three and a half minutes or more to respond. No
other commands will be executed until calibration is complete.
Calibration and Diagnostic
*CAL?
CALibrate INTERNal
CALibrate
INTERNal
<Space>
INTERNal specifies an internal selfĆcalibration.
CALIBRATE INTERNAL
performs an internal selfĆcalibration.
CH<x>? (Query Only)
Returns the vertical parameters. Because CH<x>:SCAle and CH<x>:VOLts
are identical, only CH<x>:SCAle is returned.
Vertical
CH<x>?
CH
<x>
?
CH1?
might return the string :CH1:SCALE 10.0E–3;POSITION 0.0E+0;
OFFSET 0.0E+0;COUPLING DC;BANDWIDTH FULL for channel 1.
Group:
Related Commands:
Syntax:
Arguments:
Examples:
Group:
Syntax:
Examples: