Tektronix TDS 350 Sprinkler User Manual


 
Command Descriptions
Syntax and Commands
2Ć140
RS232:PRESEt
sets RS232 parameters to the default values.
RS232:SBITS
Sets or queries the number of transmission stop bits sent with each character
to identify the end of data for that character. This command performs the
same function as RS232:STOPBits.
Miscellaneous
RS232: BAUD, RS232: HARDFLAGGING, RS232: PARITY, RS232:SOFTFLAGĆ
GING, RS232?
RS232:SBITS <NR1>
RS232:SBITS?
STOPBits
:
<Space>
?
RS232
<NR1>
<NR1> where <NR1> can either be 1 or 2.
RS232:SBITS 1
sets the number of stop bits to 1.
RS232:SOFTFlagging
Sets or queries the input and output soft flagging over the RSĆ232 port. After
receiving an XOFF (DC3), the oscilloscope sends two or less characters. The
oscilloscope sends an XOFF character when its input buffer is running out of
space. After sending an XOFF character it can receive at least 20 more bytes.
The oscilloscope begins transmitting data again when it receives an XON
(DC1) character. It sends XON when its input buffer has an acceptable numĆ
ber of free bytes.
When soft flagging is enabled and binary data is transferred, data transmisĆ
sion will lock up if the data contains XOFF or XON characters.
Miscellaneous
RS232: BAUD, RS232: HARDFLAGGING, RS232: PARITY, RS232: STOPBITS,
RS232?
Examples:
Group:
Related Commands:
Syntax:
Arguments:
Examples:
Group:
Related Commands: